When you make guitars you need to make guitar necks. Guitar necks need fingerboards, and unless you build a fretless instrument, you need to cut slots for the frets into the fingerboard. The most common tool is a fret slotting saw (I guess most hobby luthiers don’t have access to a CNC machine, and using a Dremel with a very fine routing bit might be a bit tricky, if you even own such a device).
Those slots must be deep enough to accommodate the tangs of the fret wire so that the crown of the frets actually rest on the surface of the fingerboard but the tangs don’t touch the bottom of the slot by a hair’s width. On the other hand,e the slots shouldn’t go too deep because you don’t want your fretboard to be wobbly. Stability and stiffness is what you want. So making sure you don’t cut too deep is kind of important. But how do you do that?
You use a jig that limits how deep you can cut, and if you don’t have one and don’t want to buy one, you Continue reading “Depth Stop for the Fret Slotting Saw”